How to overboard motor of Ships overboard motor

How to overboard motor of Ships overboard motor

The oil level of the engine must be checked every time an Outdoor boat engine is used.

The first month or the first 20 hours need oil change.

After that,

Oil should be changed every six months or 100 hours.

Actually, the engine oil of the outboard engine of a ship,

With motorcycles, cars, etc.

It's all the same.~

If the oil is insufficient or contaminated,

It will affect the service life of sliding parts or movable parts.

Exhaust oil while the engine is still hot.

Make sure the oil is discharged quickly and thoroughly.

1. Place overboard motor vertically.

Then remove the hood and refueling cover.

2. While pulling the oil discharge nozzle cap backward at a certain angle,

Push the control rod of the oil outlet cover, and then remove the oil outlet cover.

3. Place the cover of the oil outlet under the guide pipe.

4. Place a suitable container under the diversion tube.

5. Remove engine oil drain bolts and sealing gaskets with a 12 mm wrench.

Then the engine oil is discharged.

Install new sealing ring and drain bolt, then tighten bolt firmly.

6. Contrast the oil level gauge, add the recommended oil until the upper oil level mark.

7. Firmly install oil level gauge.

8. Install oil outlet cover.

According to the direction indicated by the "lock" arrow mark,

Push the control rod of the oil drain cover.

Then install the oil outlet cover.

At the same time, ensure that the locking lugs are firmly mounted on the protruding parts of the bottom cover.

9. Re-install the refueling cap firmly. Do not tighten it too tightly.

10. Install and firmly lock the hood.

Explain:

Please treat waste oil in an environmentally friendly way.

We recommend that you place waste oil in sealed containers.

And send it to your local service station for collection.

Do not throw waste oil into the garbage dump or spill it on the ground.

After disposing of the waste oil,

Please wash your hands with soap and water.